⚠️ Safety first: Never leave a baby or child unattended in or near water — not for a moment, not for any reason. Set the stand on a flat, dry, level surface and verify it is fully locked and stable before each use.
Adjustable baby bath stand — foldable infant bath support with non-slip feet. A bath support stand that holds a baby bath at a workable height so the adult is not kneeling on a hard floor for the whole routine. The frame adjusts to suit different tub and basin setups, and it folds flat for storage in a bathroom that has no spare corner.
Non-slip foot pads grip flat, dry surfaces to keep the frame steady in use. The folding action is the point of the design as much as the height is — it goes up for bath time and comes down again afterward rather than living permanently in the way.
Dimensions & Size
-
Open (assembled) dimensions: Approximately 70 cm × 40 cm × 70–85 cm (L × W × H); height is adjustable across multiple positions
-
Folded dimensions: Approximately 70 cm × 40 cm × 10 cm — slim enough to slide behind a door or into a cabinet gap
-
Compatible bath/basin size: Fits standard infant bath tubs and basins measuring approximately 55–72 cm in length and 30–40 cm in width; basin must rest securely within the four support arms with at least 2 cm of contact on each side
Weight & Age Limits
-
Maximum child weight: 15 kg (33 lb)
-
Recommended age range: Newborn to 18 months (or up to the weight limit, whichever comes first)
-
Developmental note: Designed for pre-walking infants who cannot sit unsupported for extended periods; discontinue use when the child begins to pull up, stand, or attempts to climb out of the tub
Materials
-
Frame: Powder-coated carbon steel — rust-resistant, wipe-clean surface
-
Contact surfaces (tub-support arms): BPA-free PP plastic with soft EVA padding; no sharp edges or exposed metal where the bath rests
-
Non-slip feet: TPR (thermoplastic rubber) — grips flat, dry, hard-floor surfaces; not suitable for use on wet tile without a separate anti-slip mat beneath the feet
Assembly & Locking
- Unfold the stand until both side rails click audibly into the open position.
- Set all four feet flat on a level, dry surface.
- Slide the height-adjustment collar to the desired position and tighten the locking knob firmly clockwise until it does not turn further.
- Place the infant bath inside the four support arms; confirm the basin does not rock or shift.
- Before placing the child, apply light downward pressure to each corner of the basin to verify the stand does not wobble.
- To fold for storage: remove the basin, loosen the locking knob, press the release tabs on both side rails simultaneously, and fold the stand flat.
Included Parts
- 1 × Adjustable bath stand frame (pre-assembled, tool-free setup)
- 4 × Attached non-slip TPR foot pads
- 1 × Height-adjustment locking knob
- 1 × Instruction sheet (EN/FR/DE/ES)
Bath tub/basin not included.
Cleaning Instructions
- Wipe the frame and plastic contact arms with a damp cloth and mild soap after each use.
- Do not submerge, spray directly with a hose, or place in a dishwasher.
- Dry thoroughly before folding for storage to prevent moisture build-up at the hinge points.
- Inspect rubber feet and locking knob monthly; replace if worn, cracked, or loose.
Warranty
12-month manufacturer's warranty against defects in materials and workmanship under normal domestic use. Warranty does not cover damage from exceeding the stated weight limit, commercial use, modification, or improper assembly. Contact GiftMira support with your order number to initiate a claim.
Who it suits
New parents setting up a first bathroom routine, families in apartments where nothing gets left out permanently, and anyone buying for a baby shower who would rather give something used every single day than something photographed once.